|
This kit contains all the materials you need to reupholster a set of dining
seats
except the top fabric and specialist tools which are
available elsewhere on
our site (see links below). Also available on our
website are help sheets to guide
you through the process of upholstering your
chair seats. The kit is suitable for
dining chairs which only require the
seats to be covered. If your chairs have
upholstery on the backs or
elsewhere you will need additional materials to complete the
job.
FABRIC REQUIREMENTS. Six
standard
seats can be covered in 2 metres of fabric.
Allow 100 mm
(4”) of fabric all around the seat
for turning under and fastening.
As a general
rule you will only get two seats side by side from a
standard width upholstery fabric
(1.38mts 54”)
This kit comprises:
6 x 20" x 20" x 1.5" RX38 Foam
1 x Can Spray
Adhesive
1.5 x Metres Dipryl Bottoming
Black
3 Metres Polyester wadding 2oz
Tools required
Pin
nHammer or Magnet
ic
Hammer
Staple
Remover
or Tack
Lifter (Depending on whether you
have to remove tacks or
staples)
Carpen
ters Pincers (To assist in removing old staples/tacks
etc)
Staple
Gun & 10mm
Staples (If you want
to staple the
new fabric on)
OR 500gm
box
13
mm tacks (If you want to tack it on)
Knife
(
Stanley
type) (To trim new fabric)
Help Sheet Upholstering
a modern
screw on seat
|
