Substitute for Trim High Temperature Spray Adhesive
Aerosol Solutions AS 1216 is ideal for use in vehicle trimming applications such as headlinings, door and panel trims, carpets etc. It exhibits high temperature resistance up to 100 degrees (ideal for 80-90 degrees) and is extremely flexible.
It is particularly suited for bonding most furnishing materials including fabrics, leather, foam, carpets ect. to themselves or each other or to substrates such as wood, metal, plastic or rubber.
Very effective in manufacturing of refurbishing the interiors of coaches, caravans, leisure homes, boats and other simular vehicles.
Directions: The surface to be bonded must be clean, dry and contaminant free. Adjust the nozzle to give the required spray pattern and from approximately 8-12 inches spray one surface horizontally and the other vertically each to a minimum coverage of 80%. Allow the adhesive to become a touch tacky (40-60 sec). Press firmly together from the centre working outwards to achieve a good contact and exclude any air bubbles. Do not stress the joints for several minutes, allow full bond strength to develop.
After use, invert can and spray once to prevent spray head clogging and blocking.
Excess adhesive can be removed by wiping with white spirit.
DO NOT USE ON FLEXIBLE (PLASTICIZED) PVC.
Available by cans or in box of 12 cans (SPECIAL OFFER)
Please, read Health and safety note on a can before use.