16 clear glue long sticks for use in in Tacwise Hot-Melt Glue Gun and most standard 12mm Hot Melt Glue Guns.
Size: 11.75mm x 300mm
NON – HAZARDOUS
Ideal for fabric, fixing trimmings like braid/fringe/gimp etc. and many other uses. Multi Purpose adhesive sets clear and gives a strong long lasting bond. It is solvent free, odourless and clean and easy to apply.
Ideal for: General Repairs, Hobby Crafts, Fabrics, Floristry, Upholstery and many more.
Can be used for: Wood, Furniture, Joints, Veneers, Mouldings, Crafts, Housefhold Repairs and many more.
Ensure surfaces to be bond are dry and clean.
Insert a Glue stick into channel at rear of gun.
Press trigger a few times until the glue stock is firmly positioned in the gun.
Plug gun and switch on. Rest the gun on its stand and allow to warm up for apr. 5 minutes.
Squeeze trigger until adhesive flows from nozzle.
To ensure continuous flow of glue, insert a further glue stick into channel.
Apply adhesive to one surface only. Glue need to be spread.
Press surfaces together within 15 seconds to allow immediate bonding.
The glue sets firm within 60 seconds.
Do not forget to switch off and unplug gun. Place gun on its stand to coll.
Remove any surplus glue with sharp knife only once it has cooled.
Do NOT remove stick from the back of the gun, as this may cause damage.
ATTENTION: KEEP AWAY from food, drink and animal feeds tuffs. When molten avoid contact with any part of the body. In case of contact plunge affected part immediately into cold water without removing. Seek medical advice. DO NOT breather fumes. Wear suitable gloves and eye protection.. Vapour from molten adhesive is flammable, keep away from sources of ignition. NO SMOKING.