Cut Pirelli Straps 2″ (50mm) wide with clips fitted. (Cannot be used on Ercol Furniture)
Measure between the middles of the two opposite slots and buy that size, for example it the gap between the slots in the chair is 18″ then buy an 18″ strap to span the seat; if the gap is, for example, 18.5″, place an order for 18″ straps and leave us a note at the checkout, you need straps to be 18.5″. The minimum number of straps per seat is 5, but if there is space for 6 then it is better to use an extra web to share the load. The webbing has a rough side and a smooth side, the rough side should be uppermost as this will help to hold the cushion in place. (Please, note, it SHOULD NOT BE an EASY job to install a strap – you need to make some effort to slide it to the place to achieve the right tension).
Available in Sizes up to 30″. Please contact us if you require straps in any other sizes.
|Length inches||Length (apr) cms.||Price per strap|
TIP from us:
The type of clips on a photo (you can click on the photo to enlarge it) is no longer available to the best of our knowledge.
If you have such clips, you can buy webbing by the m and re-use old clips by carefully opening them up with a screwdriver, that would be best.
Otherwise, the new clips can be used with a self-tapping screw inserted into the slot to hold the clip in place. Your straps need to be ~1” or a bit longer in this case or, to be on the safer side, you can buy webbing and clips and make straps yourself.)